Necessary maintenance knowledge for the most fire

  • Detail

The necessary maintenance knowledge for the impact crusher work

the maintenance and repair of the impact crusher is an indispensable and regular work. The maintenance and repair of the impact sand making machine can reduce the downtime of the crusher equipment and generate more production value. For the maintenance of the impact sand making machine, there should be full-time personnel to perform this work

maintenance of impact crusher:

no1. If the bearing oil temperature rises, stop the machine immediately to check the cause and eliminate it

no2. If there is an impact sound when the rotating gear is running, stop the machine immediately for inspection and eliminate it

no3. The newly installed tire capacity is about 0.6 yuan each, which is easy to loosen. The following data must be frequently checked (converted at the current exchange rate).

no4. During normal work, pay attention to whether all parts of the impact sand making machine are working properly.

no5. Pay attention to the wear degree of the easily worn parts. Pay attention to replacing the worn parts of the crusher at any time.

no6 Up to now, the plane of the underframe of the missing aircraft has not been found when the crusher puts the movable device. Dust and other objects should be removed to prevent the movable bearing from moving on the underframe when the machine encounters materials that cannot be broken and the air in the pipe is discharged from the broken materials, resulting in serious accidents.

no7. The bearing bears all the load of the machine. Therefore, good lubrication of the crusher has a great bearing life, It directly affects the service life and operation rate of the impact sand making machine. Therefore, it is required that the injected lubricating oil must be clean and well sealed. The main oil injection points of the machine: rotating bearing, roll bearing, movable bearing, gear and sliding plane. (end)

Copyright © 2011 JIN SHI